Mainboard MSI X299 PRO (Socket 2066, m-ATX, 8 khe Ram DDR4)

PROCESSOR

Supports Intel^® Core™ X-series 10000/ 9000/ 78xx (above) processors for socket LGA2066

CHIPSET

Intel^® X299 Chipset

MEMORY

• 8 x DDR4 memory slots, support up to 256GB
  • Supports DDR4 4200+(OC)/ 4000(OC)/ 3800 (OC)/ 3733(OC)/ 3600(OC)/ 3466(OC)/ 3400(OC)/ 3333(OC)/ 3300(OC)/ 3200(OC)/ 3000(OC)/ 2933/ 2666/ 2400/ 2133 MHz^1,2
• Quad channel memory architecture
• Supports Intel^® Extreme Memory Profile (XMP)
• Supports non-ECC UDIMM memory
• Supports un-buffered memory

1. For the latest information about memory, please visit http://www.msi.com
2. Please refer the DIMM Slots section for more details.

SLOTS

• 4x PCIe 3.0 x16 slots
  • Support x16/x8/x16/x8 mode with the 48-lane CPU.¹
  • Support x16/x4/x16/x8 mode with the 44-lane CPU.¹
  • Support x16/x4/x8/x0 mode with the 28-lane CPU.¹

1. Please refer to user manual for PCIe 3.0 bandwidth table.

MULTI-GPU

• Supports 3-Way NVIDIA^® SLI™ Technology
• Supports 3-Way AMD^® CrossFire™ Technology

STORAGE

Intel^® X299 Chipset

• 6 x SATA 6Gb/s ports¹
• 2 x M.2 slot (Key M)
  • Support up to PCIe 3.0 x4 and SATA 6Gb/s, 2242/ 2260/ 2280/ 22110 storage devices^2,3
  • Intel^® Optane™ Memory Ready⁴

1. The SATA1 connector will be unavailable when a SATA M.2 SSD has been installed in the M2_1 slot.
2. The M2_2 default setting is CPU lane. However, when a PCIe expansion card is installed in the PCI_E2 slot, the M2_2 will be automatically switched to PCH lane.
3. The SATA2 connector will be unavailable when M2_2 uses PCH lanes and a M.2 SATA SSD is installed in the M2_2 slot.
4. M2_2 supports Intel® Optane™ Memory by switching to PCH lanes.

RAID

Intel^® X299 Chipset

• Supports RAID 0, RAID1, RAID 5 and RAID 10 for SATA storage devices
• Supports RAID 0 and RAID 1 for M.2 PCIe storage devices

USB

AUDIO

Realtek^® ALC1220 Codec

• 7.1-Channel High Definition Audio
• Supports S/PDIF output

LAN

• 1 x Intel I219-V Gigabit LAN controller¹
• 1 x Realtek RTL8125-CG 2.5G LAN controller

1. I219 LAN doesn’t support G3 to S5 Wake

INTERNAL CONNECTORS

• 1 x 24-pin ATX main power connector
• 2x 8-pin ATX 12V power connectors
• 6x SATA 6Gb/s connectors
• 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
• 2x USB 3.2 Gen1 connectors (supports additional 4 USB 3.2 Gen1 ports)
• 1x USB 3.2 Gen2 Type-C port
• 1x 4-pin CPU fan connector
• 1x 4-pin Water Pump connector
• 4x 4-pin system fan connectors
• 1x Front panel audio connector
• 2x System panel connectors
• 1x TPM module connector
• 1x Chassis Intrusion connector
• 1x Virtual RAID on CPU connector
• 1x Thunderbolt Add-on Card Connector

BACK PANEL PORTS

DIMENSIONS

• 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
• ATX Form Factor

MOUNTING

9 mounting holes

OPERATING SYSTEM

Support for Windows^® 10 64-bit